Product Description
YQBW-571 Engine Crankshaft Pulley For MINI 02-08
Product Description
Crankshaft Pulley
The crankshaft pulley (harmonic balancer) is mounted on the end of the crankshaft. Its purpose is to turn the drive belts that operate the engine accessories (alternator, air conditioning compressor, etc.)
Symptoms of a Bad or Failing Crankshaft Pulley
Knocking noise
Engine accessories may stop working
Crankshaft Pulley Related Repair Advice
The crankshaft bolt securing the pulley can loosen, affecting the operation of the pulley
The harmonic balancer includes a rubber insert between the center portion of the crankshaft pulley and the outer surface; this is what drives the belts
The rubber insert can become damaged, resulting in an abnormal noise. The outer surface can also “slip” on the rubber insert, which can affect the ability to set the ignition time on older engines
An automobile engine crankshaft pulley structure
The pulley refers to the flywheel connected to the crankshaft of the engine.
It was originally designed to drive the camshaft to rotate to drive the engine accessories, such as controlling the engine’s gas distribution system. When the engine is running, the stroke of the piston (up and down movement) valve The pulleys are generally made of cast iron as the timing action of the camshaft opens and closes in sequence.
At present, the belt pulley is generally fixed by bolts, and the bump on the front end of the crankshaft of the engine is stuck in the square hole in the center of the pulley to achieve a fixed connection with the crankshaft.
When the engine is running, the crankshaft vibrates violently under the drive of the cylinder piston.
The running of the bolt will cause the loosening of the bolt. In the prior art, the static friction between the front end of the bolt and the inner wall of the fixing hole is mainly used to prevent the bolt from loosening. However, this method will cause pressure on the bolt to deform it and eventually destroy the bolt, causing the bolt to loosen again; when the pulley is connected to the belt for conduction because the belt is stretched by high strength for a long time to cause self-aging, it is easy to take off the pulley phenomenon.
In the prior art, limit plates are generally installed at both ends of the pulley, but the belt is easy to separate The friction of the limiting plate causes loss.
Product Parameters
|
ITEM: |
SAP Crankshaft Pulley |
|||
|
OEM: |
Accept |
|||
|
MOQ: |
1 pcs (If the goods have ex-stock, small quality will be available) |
|||
|
BRAND: |
SAP Brand or Customer’s Brand |
|||
|
PACKING: |
Natural Packing or Packing as Customers required |
|||
|
PAYMENT: |
L/C, T/T, Western Union, MoneyGram.etc, |
|||
|
WARRANTY: |
12 Months |
|||
|
PORT: |
ZheJiang /HangZhou |
|||
|
ADVANTAGE: |
Good Quality and Competitive Price |
|||
|
SAMPLE: |
Customized Sample |
|||
|
Quality: |
Produce According to ISO/TS 16949:2002 Standard |
|||
|
TEAM: |
Powerful Production and R&D Capability |
|||
Company Profile
ZheJiang Strong Auto Parts Co., Ltd. is a professional manufacturer of many kinds of automobile control arms and automobile pulleys founded in 1995. We have registered 2 famous brands ”STRONG”and”SAP” in China. With constant technical innovation and persevering high professional dedication, Strong company has owned a strong ability for research and development through the adoption of the advanced manufacturing process in the world, with scientific management and a strict product quality control system, Strong company has succeeded in passing the Germany certification in 2009.
ZheJiang Strong Auto Parts Co., Ltd. has many kinds of control arms and pulleys, we are a leading manufacturer of alternator overrunning pulleys and crankshaft damper pulleys, and car control arms on its processing, many technologies we have our invention patented in China, and the production capacity per year can be several million pieces. Now our products have been exported to many European, American, and Canadian countries for many years.
ZheJiang Strong Auto Parts Co., Ltd. has developed its own unique people-centered cooperation culture featuring ”technology innovation, people-oriented, integrity cooperation, and pursuit perfection”, we persevere in our efforts to improve our equipment performance and worker ability, and we sincerely hope to build good cooperation with you for our mutual prosperous business through our high-quality products and best service.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Application: | Excavator, Lawnmower, Tractor, Ke Tan, Boat, Motorbike, Truck, Car |
| Certification: | RoHS, TS16949, ISO 9001, CE |
| Warranty: | 6 Months |
| Engine Type: | Gasoline |
| Material: | Forged Steel |
| Samples: |
US$ 30/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can mini pulleys be retrofitted into existing systems for improvements?
Yes, mini pulleys can be retrofitted into existing systems to bring about improvements. Here’s a detailed explanation:
1. Compatibility: Before retrofitting mini pulleys into an existing system, it is important to ensure compatibility. Consider factors such as space availability, load requirements, and the existing system’s design. Mini pulleys should be selected based on their compatibility with the system’s components, such as belts, cables, and shafts.
2. Identify Improvement Areas: Assess the existing system to identify areas that can benefit from the retrofitting of mini pulleys. This could include enhancing power transmission, improving motion control, reducing friction and energy loss, optimizing space utilization, or achieving better load distribution.
3. Consult Manufacturer or Experts: Seek guidance from the manufacturer or consult with experts who specialize in mini pulleys and retrofitting. They can provide insights into the feasibility of retrofitting mini pulleys into your specific system and suggest appropriate solutions based on your requirements.
4. Design and Engineering Considerations: Retrofitting mini pulleys may require design and engineering considerations. Evaluate the existing system’s structural integrity, alignment, and mounting options to ensure proper integration of the mini pulleys. It may be necessary to make modifications, such as adjusting mounting brackets or pulley positions, to accommodate the new components.
5. Performance Analysis: Conduct a performance analysis to determine the potential improvements that can be achieved by retrofitting mini pulleys. This may involve simulations, calculations, or prototype testing to evaluate the impact on power transmission, motion control, efficiency, or other desired performance parameters.
6. Installation and Testing: Once the mini pulleys are selected and the design considerations are addressed, proceed with the installation. Follow the manufacturer’s guidelines for proper installation and ensure that all components are securely mounted. After installation, conduct thorough testing to evaluate the improvements achieved and make any necessary adjustments.
7. Monitoring and Maintenance: Regularly monitor the performance of the retrofitted mini pulleys and conduct routine maintenance as recommended by the manufacturer. This includes inspections, lubrication, and replacement of worn components to ensure optimal performance and longevity.
Retrofitting mini pulleys into existing systems can bring about significant improvements in terms of power transmission, motion control, efficiency, and overall performance. However, it is important to consider the specific requirements of the existing system, seek expert advice, and follow proper installation and maintenance practices to ensure successful retrofitting and long-term benefits.
What are some real-world examples of mini pulley applications in robotics and small machinery?
Mini pulleys find numerous real-world applications in robotics and small machinery. Here’s a detailed explanation:
Mini pulleys offer precise power transmission and motion control, making them valuable components in robotics and small machinery. They enable various functionalities and enhance the performance of these systems. Here are some real-world examples of mini pulley applications in robotics and small machinery:
- Robotic Arms: Mini pulleys are commonly used in robotic arms to control the movement and positioning of joints. They enable smooth and precise motion, allowing the robot to perform tasks that require accuracy and dexterity, such as assembly, pick-and-place operations, or surgical procedures.
- Automated Guided Vehicles (AGVs): AGVs utilize mini pulleys to drive their wheels or tracks, enabling precise control of speed and direction. Mini pulleys help AGVs navigate autonomously in warehouses, factories, or other environments, optimizing logistics and material handling processes.
- Small CNC Machines: Mini pulleys are employed in small CNC (Computer Numerical Control) machines to transmit power and control the movement of axes. They contribute to the accurate positioning and controlled motion of the cutting tools, enabling precise machining operations in a compact setup.
- Printers and Plotters: Mini pulleys are used in printers and plotters for paper feeding and carriage movement. They ensure precise paper alignment and controlled movement of the print head or plotting mechanism, resulting in accurate prints or drawings.
- Microscopes and Optical Instruments: Mini pulleys are utilized in microscopes and other optical instruments to control the focus, zoom, or lens positioning. They allow for precise adjustments, enabling users to obtain clear and detailed observations in various scientific, medical, or industrial applications.
- Small Conveyor Systems: Mini pulleys are integral components of small conveyor systems used in industries like food processing, packaging, or material handling. They enable the smooth and controlled movement of objects along the conveyor belt, ensuring efficient transportation and sorting processes.
- Compact Robotic Grippers: Mini pulleys play a vital role in compact robotic grippers, allowing them to open, close, and grip objects with precision. By controlling the tension and movement of the gripping mechanism, mini pulleys enable delicate handling of objects in applications like assembly, sorting, or laboratory automation.
These are just a few examples of how mini pulleys are applied in real-world robotics and small machinery. Their ability to provide precise power transmission, motion control, and compact size make them indispensable components in various applications, enabling enhanced functionality, accuracy, and efficiency.
How do mini pulleys contribute to space-saving and efficient systems?
Mini pulleys play a crucial role in creating space-saving and efficient systems. Here’s a detailed explanation:
- Compact Size: Mini pulleys are smaller in size compared to standard-sized pulleys, which allows for significant space savings. They occupy less physical space, making them ideal for applications with limited real estate. The compact size of mini pulleys enables the design and integration of more compact machinery and equipment, optimizing space utilization.
- Tight Space Maneuverability: Mini pulleys are designed to operate in tight spaces where larger pulleys would not fit. Their compact size allows them to be installed in confined areas, enabling the routing of belts, ropes, or cables around obstacles or in narrow assemblies. This maneuverability contributes to efficient system layout and utilization of available space.
- Weight Reduction: Mini pulleys are lightweight due to their smaller size and reduced material requirements. This weight reduction offers several benefits for space-saving and efficient systems. Firstly, it helps minimize the overall weight of the equipment or system, which is particularly advantageous in applications that require portability or where weight reduction is critical. Secondly, the reduced weight of the pulley itself reduces the inertia and rotational mass, allowing for faster acceleration, deceleration, and more efficient energy usage.
- Integration in Compact Mechanisms: Mini pulleys can be integrated into compact mechanisms and systems due to their smaller dimensions. They can be easily incorporated into intricate assemblies, where space is limited, without sacrificing performance or functionality. This integration capability enables the design of more compact and streamlined systems, contributing to space-saving and efficient overall designs.
- Precision and Control: Mini pulleys provide finer control and more precise movements due to their compact size. The reduced dimensions result in shorter lever arms, minimizing mechanical play or backlash. This enhanced precision is crucial in applications that require accurate positioning or synchronization. The precise control offered by mini pulleys allows for optimal use of available space and efficient operation of the system.
- Improved Energy Efficiency: Mini pulleys contribute to energy efficiency in space-saving systems. The reduced weight and compact size of mini pulleys result in lower inertia, which means less energy is required to accelerate or decelerate the pulley and the connected components. This improved energy efficiency translates to reduced power consumption and more efficient use of available resources.
In summary, mini pulleys contribute to space-saving and efficient systems by their compact size, maneuverability in tight spaces, weight reduction, integration in compact mechanisms, precision and control, and improved energy efficiency. These characteristics make mini pulleys valuable components in applications where space optimization, precise control, and efficient operation are essential.
editor by CX
2024-03-11